80 Commits

  • README, changelog and screenshots for 1.21: Lucid is an ecosystem
    - README rewritten around the headline: a website link, an ecosystem table, a
      tour of the new screenshots, and dropdowns for every part, the installer,
      keybinds, IPC, requirements and troubleshooting
    - CHANGELOG: v1.21, everything since v1.20.1, with the screenshots; the older
      sections' pictures point at v1.20's copies
    - Ten new screenshots replace the old ten; the installer's tour shows them
    - What's new rebuilt for 1.21 ("An ecosystem"), section icons for its headings
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Installer and Hyprland: Clock's entry, and the shipped modules as they run here
    install.sh registers the Clock app beside Lumen and Lens, and uninstall.sh
    takes its entry away again. The shipped Hyprland modules catch up: Clock's
    floating window rule, glass without grain or a vibrancy boost, a smoother
    tilting cursor that leans further, and the pointer's plugin settings.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Shell: the tray, Lucid's own pointer, the clock engine, network drives and the bar's content size
    - Tray: both looks rebuilt in Material You, every app in a slot of its own or
      three stacked with a count; a click opens the tray, each app a row with its
      menu opening in place
    - Pointer: Bibata Modern's shapes drawn from source in the palette's colours,
      fading with it, the tilt card, and the shell drawing the pointer itself in drags
    - Clock's engine in the shell (Alarms, ClockLink): alarms ring with the app
      closed and always post Snooze and Stop
    - Lumen: network drives (Connect to server, shares, Nearby); Lens: videos
    - Bar: Content size, notch edges as quarter ellipses up to 64 px, frosted and lit
      on hover; fixes across the dock, desktop, widgets, LucidShot and Settings
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Hyprland: xray off again, the glass frosts what is behind it
    Back to see-through glass at the user's word: a panel over a window shows
    the window. Reverts 131adde.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Hyprland: xray back on for the shell's glass, so it matches where it joins
    Without xray each layer surface is blurred on its own from what is drawn
    behind it, and how far that blur gathers depends on what is being redrawn.
    Two surfaces that meet frosted to different shades: the launcher standing
    on a bottom bar sat a step lighter than the strip under it (19-21 levels in
    the rig, the same step in a screenshot of the real desktop), and panels did
    the same. With xray all of them sample the one blurred background and the
    step is gone (0-1). A panel over a window now frosts the wallpaper rather
    than the window. Applies on a config reload; nothing needs restarting.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Icons: folders in the accent, not a tint of it
    Every folder's front and back panels go a step deeper, so they carry the theme's own colour instead of a pale wash of it, and the two folder apps, Files and Lumen, move to the dark tile the other apps sit on.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Settings: its icon is Lucid's own orbit around a gear
    The logo's broken ring and companion dot, on their real geometry, with the gear where the star sits. It replaces the sheet of sliders.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Brand: Lucid's official colour is cyan, #00F0FF
    The logos, the README, and the tonal palette the icon kit paints with, so Lumen's and Lens's plain icons and the reference sheets follow it. Its twin for light backgrounds is #006970, the same seed's light-mode primary.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Settings: an icon and a name of its own
    The window belongs to the shell's process, so it carries quickshell's app id and the dock showed Quickshell's green gear and name. A new icon joins Lumen's and Lens's, as a theme slot and a plain svg, and install.sh writes a user org.quickshell.desktop, which wins over the system's by id, so every surface finds Lucid Settings.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Keybinds: SUPER+V floats a window at 1366x768, centred
    It was a plain toggle. install.sh moves a bind still at that old default to the new one; one you changed yourself stays.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Installer: a button between light and dark
    A taste of how the shell follows its colours: the button at the top
    right of the window turns the whole window light or dark. The two
    schemes ship in support/installer, made with matugen from Lucid's own
    quickshell-colors.json template (the dark one matches Theme's built-in
    fallback). The accent still comes from the screenshot on show, and the
    surfaces take its hue, in either mode.
    
    Theme's scheme path is now a property, palettePath, which the installer
    points at one of the two. The shell leaves it at
    ~/.cache/quickshell/matugen.json as before.
  • Installer: every switch on when opened directly, and the picture fills the height
    Opened without install.sh, LUCID_INSTALL_ARGS is unset, env() gives null
    and the split threw, which left every switch reading as off. The window
    is now as tall as its choices and as wide as the 16:9 screenshot needs
    to fill that height (no wider than the screen), with the caption kept to
    one line so the two do not depend on each other.
  • Installer: the window by default, one size, and the login screen
    ./install.sh run bare from a terminal in a Wayland session now opens the
    window; any option, no Wayland, no terminal, the updater (LUCID_UPDATER)
    or --terminal keep it in the terminal. --gui with options starts the
    switches from them, and options the window has no switch for (-y,
    --skip-deps, --with-hypr) are passed on as they are.
    
    The window has a fixed size, which also makes Hyprland float it without
    a window rule.
    
    A Login screen switch: on is --login-screen, which installs the SDDM
    theme and makes it the one shown (install-theme.sh --current sets
    Current=lucid under [Theme] in /etc/sddm.conf, the file that outranks the
    drop-ins, after backing it up once); off is --no-sddm. It is locked when
    SDDM is not installed or the theming layer is off. Run bare in the
    terminal, the theme is still installed but not switched to, as before.
  • Install from a window: ./install.sh --gui
    install.sh --gui installs only what the window needs (quickshell, its Qt
    modules, qt6-imageformats for the webp screenshots, python) and opens
    installer.qml from the source tree. Its switches become install.sh's own
    --no-* flags, and the run is the updater's: updater.py --src runs the
    local tree's install.sh in its pty, so the password, the steps, the
    questions and the log are the same card the in-shell update uses
    (UpdateCard, with a "fresh" wording and Close / Start Lucid at the end).
    
    While it works the README's screenshots play beside it, and each one
    tints the window's accent from its strongest colour (Theme.seed, unset
    in the shell), the way a wallpaper would.
    
    Theme's font now loads beside Theme.qml, so the window has the brand
    font before anything is installed; for the shell that is the same file.
  • Installer: Zen takes Matugen's colours on a fresh install
    Zen's templates were only added once it had a profile, and on a fresh install it has never run, so nothing ever added them. setup-zen.sh first-run starts it once with no window to make the profile.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Icons: dark tiles take the shell's card colour
    They were a neutral near grey on every palette. A new container family follows the theme, for all 23 dark tiles in both Gravity sets.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Displays: keep a workspace split for each set of displays
    Per display kept one split for every display, so arranging the workspaces
    for a second monitor wrote over the split made for the first, and plugging
    the first one back in brought nothing back.
    
    The split is now kept for each set of displays that can hold a workspace,
    and the one for the set plugged in is what goes to Hyprland. A set seen for
    the first time starts from the last split made, with the workspaces of a
    display that is gone handed to the new ones that hold nothing. The old
    single split becomes the one for the displays it names.
    
    Workspace rules only place a workspace as it is made, and a display plugged
    in gets back whatever last sat on its port, so once new rules are in, the
    page calls LucidMonitors.gather(): open workspaces move to their display,
    and a display left on an empty workspace of nobody's opens on its own
    lowest one. This also moves an open workspace right away when it is
    assigned to another display on the page.
  • Merge pull request #87 from ciroenrique4-eng/pr/stop-mirroring
    Displays: Stop mirroring works, and the freed display gets its wallpaper and bar
  • Login screen: the lock's size, corners and glance chips
    The greeter drew every size at its shipped pixels and its corners at their
    shipped radius, while the lock goes through the interface size and corner
    rounding settings, so at anything but 100% the two looked different. The
    running shell now hands both over with the colours (theme-dump.qml), the
    greeter's Theme has the shell's dp(), rad() and pill(), and every size in the
    greeter goes through them exactly where the lock's does.
    
    The chips top right are the lock's: battery, network and bluetooth, with its
    symbols, labels and colours, read off sysfs since a greeter has no session to
    ask. qml may only read local files with QML_XHR_ALLOW_FILE_READ, which
    install-theme.sh adds to the greeter's environment; without it the machine's
    name stands in, as before. Wi-Fi shows as "Wi-Fi" and bluetooth only as on or
    off, since sysfs knows neither the network's name nor what is paired.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Login screen: blur the wallpaper live over sharp copies, as the lock does
    Baking the blur into a small copy and stretching it showed the encoder's
    blocks, however well its amount was matched: the lock blurs after it scales,
    which hides them. sync-sddm.sh now writes sharp copies the way set-wallpaper.sh
    writes the desktop's: the still scaled to cover the largest screen (never up)
    at quality 95 with full-size colour, and a live wallpaper's video at screen
    width, at most 1920 so the greeter can decode it in software. The greeter runs
    the lock's own blur over them, 0.5 at rest and deeper with focus.
    
    theme.conf says backgroundSharp=true for such copies. Without it, from an
    older sync-sddm.sh, the greeter keeps treating the copy as blurred already.
    The jpeg:size hint is gone: libjpeg then scales while decoding, up for a small
    picture and too far down for one wider than the screen.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Login screen: blur the wallpaper as much as the lock does
    The login screen bakes its resting blur into background.jpg rather than run a
    live one on a cold gpu at boot, and the bake was twice the lock's: measured at
    1080p, the lock at rest is about sigma 7, the old bake about 13.5, which is the
    lock focused. So the login screen came up looking blurrier than the lock.
    
    The still is now blurred 1.75 at 480 wide and the live wallpaper's copy 1.85,
    both sigma 7 once grown back. The greeter's focus deepening goes from 0.32 to
    0.7, since blurs don't add up linearly and 0.7 over the lighter bake is what
    the lock reaches focused. The video's blur is part of its cache key, so copies
    made the old way are made again.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Displays: a display that stops mirroring gets its wallpaper and bar
    Once Hyprland lets go of a mirror the output stands on its own, but
    clients are never told about it: no wallpaper, no bar, nothing drawn
    on it. apply() now remembers which outputs it made mirrors and switches
    one off and back on when it stops being one, which announces it.
  • Displays: Stop mirroring stops the mirror
    Hyprland keeps an output's mirror when a monitor rule leaves the field
    out, so the rule apply() wrote once a display stopped mirroring changed
    nothing and the button seemed dead. Say mirror = "" outright, both for
    a display set up on its own and for one dropped back to the defaults.
  • Login screen: make the live wallpaper's copy in the background, once per video
    The copy the greeter plays was made inside set-wallpaper.sh's apps stage, which
    holds the colour lock, so a second wallpaper picked in the meantime waited for
    it before its colours came: a 4k clip took 9-22 s and five cores (-threads after
    -i caps only the encoder). Only one copy was kept, so every switch to another
    video, or back from a picture, made it again.
    
    Each video's copy is now kept in ~/.cache/lucid/sddm-video and made once, in the
    background at the lowest priority with the decoder on two threads, and only
    while that video is still the wallpaper. sync-sddm.sh runs again to put it up
    when it is ready, and takes a lock of its own so the two runs never interleave.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Zen: follow the palette live, in its own file, and on GitHub too
    Zen paints its window from its workspace gradient, set inline by its own
    scripts, so the old template's Firefox variables did nothing. The template now
    sets Zen's own (the browser and toolbar backgrounds, the primary colour, each
    workspace's text colour) and renders lucid-zen.css in the profile Zen actually
    starts with, found from installs.ini. userChrome.css only imports it, so rules
    of your own there are kept; install.sh repoints an older zen block.
    
    Colours change without a restart: a small module loaded through fx-autoconfig
    (vendored unmodified) watches lucid-zen.css and applies it as a browser-only
    sheet. setup-zen.sh sets that up, and the stylesheet pref Zen ships off.
    
    A second template, Zen websites, themes GitHub through its own colour tokens,
    each site under its own domain rule, so the page's layout stays its own.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Merge pull request #80 from SKetU-l/login-fingerprint
    Fingerprint at the login screen, a lock screen that keeps listening, and Discord out of Comms
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Login screen: play the live wallpaper
    With a live wallpaper up, sync-sddm.sh makes a small copy of the video the
    way it makes background.jpg: 480 wide, blurred there, silent, made once per
    video. theme.conf names it as backgroundVideo, and the greeter plays it on a
    loop over the still, which is its first frame. The player sits in a file of
    its own behind a Loader, so a machine without QtMultimedia keeps the still.
    
    install-theme.sh sets the greeter to decode in software (a drop-in in
    /etc/sddm.conf.d, unless a GreeterEnvironment is set elsewhere): Qt's
    ffmpeg backend otherwise probes CUDA, VDPAU and the rest first, ~3 s before
    the video starts, and wakes a hybrid laptop's dGPU at the login screen.
  • Merge pull request #79 from ciroenrique4-eng/pr/auto-colour-mode
    Theme: follow the wallpaper into light or dark
  • Add fingerprint retry backoff and queue typed passwords
    Route Discord clients to their launched special workspace and refine
    fingerprint status prompts and session-listening behavior.
  • Improve fingerprint login retries and session handling
    Add adaptive fingerprint retry backoff and distinguish failed reads from
    silent reader timeouts. Update SDDM PAM and greeter flow to support
    background fingerprint listening while preserving password login. Also
    fix
    Hyprland OSD blur cleanup and startup visuals.
  • Theme: follow the wallpaper into light or dark
    A new switch under Settings -> Theme, off by default. With it on, a bright
    wallpaper puts the desktop in light and a dark one in dark, every time the
    wallpaper changes.
    
    set-wallpaper.sh decides it in the same run that sets the picture: with no
    mode given and the option on, wallpaper-mode.sh measures the mean grey of a
    64x64 copy (a video's first frame) against the middle, and remembers the
    answer per picture, so browsing past one again costs nothing. Deciding it in
    the shell afterwards meant a second set-wallpaper.sh, which put the picture
    up again: a live wallpaper dropped to its frame, and the picker was pulled
    back to a picture it had moved past. Applications follow once the mode has
    held for three seconds, not on every picture the strip passes.
    
    set-mode.sh takes auto as well (what the switch runs when turned on), and
    now hands set-wallpaper.sh the video rather than its frame. Switching light
    and dark by hand used to stop a live wallpaper the same way.
  • Installer: Lucid's fastfetch config, wearing the theme
    support/look/fastfetch.jsonc draws its keys, title and logo in ANSI 32, the
    colour every Lucid theme makes the primary. The look step copies it where
    there is no fastfetch config yet and leaves one of your own alone.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Release v1.20.1
    Desktop icons, bar islands and a full bar, live wallpapers and four picker
    styles, files over Bluetooth with a pairing agent, a Startup page, fingerprint
    unlock on the lock and login screens, five new widgets, metric or imperial
    units, the Steam open/close loop fixed, and the right graphics drivers for
    Steam. Fifteen pull requests from Ciro Rivera and one from SKetU-l. The full
    notes are in CHANGELOG.md.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Password beads: androidx's own MaterialShapes
    The beads on the lock screen, the polkit prompt and the login screen take
    their shapes from androidx's MaterialShapes rather than hand-made
    approximations: support/shapes/build-shapes.py ports RoundedPolygon's
    corner rounding and the MaterialShapes numbers, samples each outline's
    radii and writes lucidui/ShapeRadii.js and the greeter's copy, which
    Shapes.js reads. Fitted to their box as androidx does, so the loading
    indicator scales by the widest reach.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • ...
  • Installer: plugins.lua, the bundled font, and the launcher's terminal
    - modules/plugins.lua ships with the Lua config and hyprland.lua
      requires it: the dynamic-cursors settings, which only apply while that
      plugin is loaded. The installer says how to add the plugin with hyprpm
      rather than building it unasked
    - Google Sans Flex (OFL) goes into ~/.local/share/fonts/lucid for the
      apps the environment page dresses, and beside the SDDM theme, which
      now loads it the way the shell does; the greeter had asked for the
      proprietary Google Sans, which a fresh machine does not have
    - xdg-terminal-exec, which the launcher's $ mode runs commands through
    
    The shipped input.lua keeps a single "us" layout.
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
  • Merge #46, #47: Windows and Input pages for Hyprland
    # Conflicts:
    #	Prefs.qml
    #	README.md
    #	lucidprefs/NavGlyph.qml
    #	lucidprefs/Settings.qml
  • Merge #36, #38, #40: templates for every palette, the Colours page and the Palettes page
    # Conflicts:
    #	Theme.qml
    #	lucidbar/Theme.qml
    #	lucidprefs/NavGlyph.qml
    #	lucidprefs/Settings.qml
    #	lucidprefs/ThemePage.qml
    #	support/wallpaper/set-wallpaper.sh
  • Merge 1.10.5 (main) into 1.20
    1.20 branched at v1.1.0, so every PR built on main dragged all of 1.10.5
    along with it. This brings 1.10.5 in once, so a PR merged into 1.20 now
    only brings its own change.
    
    Where the two lines met:
    - Power: one singleton for the session actions (1.20) and the power
      profiles (1.10.5), plus Power.symbol() for the Icon surfaces
    - Control centre: game mode and the power profile are tiles in the
      editable grid (Edit tiles adds them); a right click on the power tile
      opens the profile list, a view now called "profile" so it no longer
      clashes with the session buttons' "power"; the keyboard layout chip
      sits on the compact strip
    - Keybinds: the editable keybinds.json from 1.10.5, with 1.20's
      SUPER+Escape session bind added to the shipped list; the page and its
      settings IPC moved to Prefs.settingsPages and SettingsHost
    - Widgets: 1.20's Chrono-backed timer and phone widget stay; thermals,
      network and games draw their glyphs as material symbols
    - Toasts: plain symbol names are accepted, so the event toasts no
      longer fall back to the info icon, and the detail text reads on the
      inverse surface
    - Symbol table rebuilt for the new names
    
    Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>